Pull Down Bathroom Sink G1/2 13/16 Inch Male Sprayer Head

Pull Down Bathroom Sink G1/2 13/16 Inch Male Sprayer Head

Key Features

• Construction: Acrylonitrile Butadiene Styrene (ABS) with a chrome-plated finish
• Functionality: Dual-function sprayer with aerated stream and wide spray modes
• Connection Type: G1/2 Male thread
• Nozzles: Easy-to-clean silicone nozzles resist mineral build-up

Replaces / Cross-Reference Part Numbers

• Serves as a direct replacement for sprayer heads requiring a G1/2 (approx. 13/16 inch) male threaded connection. Intended for faucets with a pull-down or pull-out hose design.

Compatibility & Fitment

• Thread Specification: G1/2 Male
• Outer Diameter: 20.5 mm / 0.8 inch / 13/16 inch
• This part is NOT universal. It is specifically designed for hoses with a G1/2 female connector.
• Does NOT fit 1/2 inch NPT threads.
• Please measure the outer diameter of your current hose connector's threads before purchase to ensure a correct fit.

When to Replace

• Leaking or dripping from the sprayer head when the faucet is off.
• Clogged nozzles causing uneven spray or reduced water pressure.
• Failure to switch between spray modes or the selector button is broken.
• Cracked or physically damaged housing.
• Finish is corroded, flaking, or worn.

Installation Tips

• Ensure water supply is turned off before starting.
• Unscrew the old sprayer head from the pull-down hose by hand.
• Check that the rubber washer is properly seated inside the new sprayer head's threaded connector.
• Screw the new head onto the hose and hand-tighten until snug.
• Do not use tools or a wrench, as this can damage the plastic threads.
• Turn the water supply back on and test all functions for leaks.