🎉 Up to 70% Off Selected ItemsShop Sale
12-inch RV Pigtail Propane Hose QCC1 Connector and a 1/4 Inverted Male Flare
12-inch RV Pigtail Propane Hose QCC1 Connector and a 1/4 Inverted Male Flare
Key Features
- Length: 12 inches
- Hose Material: Thermo-plastic rubber or braided stainless steel
- Inlet Connector: QCC1 (Type 1) nut for hand-tightening on 20 lb and 30 lb propane cylinders
- Outlet Connector: 1/4 inch inverted male flare
- Maximum Working Pressure: 350 PSI
- Safety: Integrated excess flow protection and thermal shut-off device
Replaces / Cross-Reference Part Numbers
- Replaces cracked, leaking, or age-damaged 12-inch pigtail hoses with identical QCC1 and 1/4 inch inverted male flare fittings.
- Direct replacement for pigtail hoses used on many automatic changeover two-stage regulators.
Compatibility & Fitment
- Connects standard 20 lb and 30 lb DOT propane cylinders to RV or trailer two-stage regulators.
- Fits regulators and four-port brass tees that require a 1/4 inch inverted male flare inlet.
- Commonly used for dual propane tank setups on travel trailers, fifth wheels, and campers.
When to Replace
- Visible signs of wear such as cracks, brittleness, cuts, or abrasions on the hose.
- Leaking gas detected by smell or a soapy water test at the connection points or along the hose body.
- Corrosion on brass fittings that prevents a secure, leak-free seal.
- As part of periodic maintenance, typically every 5 to 7 years, regardless of appearance.
Installation Tips
- Ensure the propane cylinder valve is fully closed before starting removal or installation.
- Hand-tighten the QCC1 nut onto the propane cylinder valve; do not use tools on this plastic fitting.
- Use appropriate wrenches to tighten the 1/4 inch inverted flare fitting onto the regulator or tee. Use a second wrench to hold the regulator inlet fitting to prevent damage.
- After installation is complete, open the cylinder valve slowly and check all connections for leaks using a non-corrosive gas leak detector solution.
- Route the hose to prevent kinking, sharp bends, and contact with sharp edges or sources of high heat.
$25.19
12-inch RV Pigtail Propane Hose QCC1 Connector and a 1/4 Inverted Male Flare—
$25.19
Description
12-inch RV Pigtail Propane Hose QCC1 Connector and a 1/4 Inverted Male Flare
Key Features
- Length: 12 inches
- Hose Material: Thermo-plastic rubber or braided stainless steel
- Inlet Connector: QCC1 (Type 1) nut for hand-tightening on 20 lb and 30 lb propane cylinders
- Outlet Connector: 1/4 inch inverted male flare
- Maximum Working Pressure: 350 PSI
- Safety: Integrated excess flow protection and thermal shut-off device
Replaces / Cross-Reference Part Numbers
- Replaces cracked, leaking, or age-damaged 12-inch pigtail hoses with identical QCC1 and 1/4 inch inverted male flare fittings.
- Direct replacement for pigtail hoses used on many automatic changeover two-stage regulators.
Compatibility & Fitment
- Connects standard 20 lb and 30 lb DOT propane cylinders to RV or trailer two-stage regulators.
- Fits regulators and four-port brass tees that require a 1/4 inch inverted male flare inlet.
- Commonly used for dual propane tank setups on travel trailers, fifth wheels, and campers.
When to Replace
- Visible signs of wear such as cracks, brittleness, cuts, or abrasions on the hose.
- Leaking gas detected by smell or a soapy water test at the connection points or along the hose body.
- Corrosion on brass fittings that prevents a secure, leak-free seal.
- As part of periodic maintenance, typically every 5 to 7 years, regardless of appearance.
Installation Tips
- Ensure the propane cylinder valve is fully closed before starting removal or installation.
- Hand-tighten the QCC1 nut onto the propane cylinder valve; do not use tools on this plastic fitting.
- Use appropriate wrenches to tighten the 1/4 inch inverted flare fitting onto the regulator or tee. Use a second wrench to hold the regulator inlet fitting to prevent damage.
- After installation is complete, open the cylinder valve slowly and check all connections for leaks using a non-corrosive gas leak detector solution.
- Route the hose to prevent kinking, sharp bends, and contact with sharp edges or sources of high heat.
